 |
 |
 |
 |
 |
 |
 |
|
|
|
 |
[ Yellow Rotor Blades ]  |
These 690mm fully symmetrical main rotor blades are manufactured in full carbon with a hot new yellow gel coat! The yellow color gives the rotor disk an extravagant look and provides better visual orientation.
Ord.-no. 1012 Main Rotor Blades Yellow 690 mm - Right Hand Rotation
|
 |
| [ Tanic-5s3p-set ] |
|
 |
| [ Tanic-Tabs ] |
Tanic-Lithium-Polymer-Batteries using their newest production technology. The batteries can be used
under high load, this high quality product is achieved by careful matching and balancing.
The 5s3p-batteries are equipped with 15 individual two pole connectors ("Tanic tabs") to each cell.
So measuring or balancing is always possible. The 6s3p-packs are equipped with 6 connectors for balancing.
For the Joker models two 5s3p packs, connected in series, are necessary, the Joker 2 can also
be used with two 6s3p-packs (2x 6s3p only in combination with Schulze 40/160H). The sets are delivered in a strong
steel case. All sets include connector cables for balancers and a detailed manual.
Weight: 5s3p: 750 g (1.65 lb) / 6s3p: 880 g (1.95 lb) Capacity: 6,45 Ah Dimensions: 285 x 59 x 26(30) mm
Ord.-no. 1900 Lipo-battery-set 2 x Tanic 5s3p 6450mAh in safety case
Ord.-no. 1910 Lipo-battery-set 2 x Tanic 6s3p 6450mAh in safety case
Ord.-no. 1901 Lipo-battery 5s3p Tanic 6450 mAh
Ord.-no. 1911 Lipo-battery 6s3p Tanic 6450 mAh
|
 |
| [ Plettenberg HP 370/40/A2 Heli ] |
Plettenberg HP 370/40/A2 Heli High-End-motor for the Joker 2 / Maxi-Joker 2. Maximum power output more than 2,5 kilowatts (3.5 hp). 8mm-shaft for Joker 2. Two internal fans and a finned housing maintains motor temperature well below the critical limit. By precision balancing the rotor very low vibrations of motor and helicopter are achieved. Therefore it is also the best choice for demanding photo jobs. For particulary high quality setups with high torque incombination with the Kontronik Jazz 55-10-32 ot the Schulze 40/160H (Extreme 3D-flight).
Ord.-no. 1620 Plettenberg HP 370/40/A2 Heli
|
 |
| [ Kohler actro-Heli motors ] |
Kohler actro-Heli series
New designed family of the worlds most popular electric motor in the 60/90 model size.
8 mm shaft for the Joker 2 / Maxi-Joker 2.
The motors are now mounted only at the top with 4 screws. Thru a special form of motor housing
the motors keep cool under all conditions.
Use:
actro 24-5: universal motor for normal daily use, beginners, weekend fliers,
simple or mild aerobatics is possible without problems, also recommended for the Maxi-Joker.
Gear reduction: i=9,0 or i=9,6:1, longest flight time of all actros, output up to 1,6 kW (2.2 hp)
actro 24-4: most popular aerobatic motor, highest output upto 2,0kW (2.7 hp) at above 20000 1/min,
i=10,2 or 10,8:1
actro 32-3: more torque than the 24-4 at the same speed, output upto 2,2 kW (3.0 hp)
i=10,2 or 10,8:1
Ord.-no. 1615 Kohler actro 24-4 Heli
Ord.-no. 1616 Kohler actro 24-5 Heli
Ord.-no. 1617 Kohler actro 32-3 Heli
|
 |
| [ Kontronik Jazz 55-10-32 ] |
Kontronik Jazz 55-10-32 Speed controller for 32 NiCd/NiMH-cells or 10 Lipo cells with superb start up and speed control software. Simply to program with switch able reverse. 60 g (2 oz) in weight, low heat output recommended for all situations including 3D aerobatics. Includes interference filter and connecting bushes.
Ord.-no. 1640 Kontronik Jazz 55-10-32
|
 |
| [ Schulze future 40/160H ] |
Schulze future 40/160H Helicopter version of the worlds most powerful speed controller, originally developed for big powerboats. Lipo batteries up to 13 cells can be used under a continuous load of 160(!) amps (210 amps short). Usage in Joker 2 in combination with Plettenberg HP 370/40/A2 and 12s3p-Lipo-battery for Extreme-3D. New helicopter software included (expert mode). Weight: 220g (1/2 lb.)
Ord.-no. 1645 Schulze future 40/160H
|
 |
| [ start adapter ] |
Hexagon start adapter
High quality start adapter for the Acrobat. All parts are made from stainless steel. Robust 10 mm freewheel unit with ball bearings.
Absolutely concentric running, retained with M4-screw.
Removable hardened full length hex shaft, so the shaft can be shortened
several times by grinding when the contact area is worn.
The hexagon shaft is available as replacement part. For any 8mm starter shafts, for Sullivan
starters with an imperial shaft please contact us.
Ord.-no. 1680 hexagon start adapter complete unit
Ord.-no. 1681 replacement hexagon shaft
|
 |
| [ tailgrips ] |
Tailgrips with pmw With these grips the force for changing tail pitch is reduced down to about 25%, so the tail reacts faster to stick deflections, the power consumption of the servo is lower and the servo lasts longer. Fully compatible with the (old) plastic tail grips.
Ord.-no. 829 conversion kit
|
 |
|
[
CNC Head Buttons ] |
CNC machined head buttons. Available in black anodized or natural aluminum.
Only $25.00 plus s/h..
