The Maxi-Joker 2 is a Joker 2 with an enlarged main rotor diameter of 1.8 m and so a 35% larger mainrotor plane. Following the worldwide success of the Maxi-Joker as professional camera-ship the Maxi-Joker 2 can also lift a weight of 2 kg., however as opposed to the Maxi-Joker the Maxi-Joker 2 is equipped with a straight tailboom with the 45°-Top-Tail gear as an option.
The gear reduction depends on the motor used, between 10,8 and 11,6:1, so a rotorspeed of 1200-1300 rpm can be achieved.
With a payload of 2 kg the all-up weight is about 8,0 kg.
Equipped with a 10s3p-battery a flight time up to 20 min can be reached, depending on the payload.
For professional camera use the Plettenberg HP 370/40/A2 is especially recommended because of its finely balanced
rotor. When using the Maxi-Joker 2 in fuselages the actro 24-5 is recommended because of its low weight.
A fuselage mount without lower frame is available as an option.
Ord.-No. 2600 Maxi-Joker 2
Ord.-No. 1030 Mainrotor S-blades CfC 800 mm right turn
Ord.-No. 1036 Tailrotor blades 130 mm
Ord.-No. 1450 Upgrade Toip-tail 45 degree gear
Ord.-No. 833 Fuselage adaptor
Note: The Maxi-Joker was developed as carrier for cameras, scale
fuselages etc., and is not recommended for aerobatics because large cyclic
deflections cause a high energy consumption.
